25 products in this product line
  • Piston Detaching Tool ( for a motor vehicle)
    • This tool is purpose designed to detach a piston from the disk brake base of a motor vehicle
    • The adjusting screw design; which is able to adjust the distance between two grasping portions and make the outer walls of the two holding blocks firmly press the inner wall of the piston; allows the operator convenient to replace a piston or a washer with a new one
    • Capacity: 16.5mm-40.0mm
    • Packing: 1 pc/slide on card; 48sets / 12.5kgs / 13.5kgs / 1.4'

  • Brake And Clutch Cable Injector
    • This tool is purpose designed to fix the brake and clutch cable when injecting the lubrication oil
    • Packing: 1 pc/slide on card; 240sets / 10kgs / 12kgs / 1.8'

  • Disk Brake Piston Compressor
    • Special wider pusher design to use on 4 pistons vehicle
    • Max. working range: 88mm
    • Applicable: BENZ, BMW and 4 Pistons Vehicle
    • Packing: 12sets / 20.2kgs / 20.7kgs / 1.9'
     

  • High Quality Brake Tool Set
    • High quality brake tool set, brake repair tool, auto repair tool.
    • 15 parts; in plastic case with soft foam insert.
    • For brake maintenance / repair.
     

  • Brake Spring Pliers
    • For glued and riveted brake linings
    • With movable claw
    • Surface chrome-plated
     

  • Brake Spring Pliers
    • For installing and removing the brake shoe recuperating spring on riveted brake linings.
    • Surface chrome plated.
     

  • Brake Calliper Brush
    • For removal of brake dust and dirt from the brake calliper.
    • For vehicles with disc brakes.
    • Slim design.
    • Plastic handle with suspension hole.
     

  • Brass Brake Callipers Brush
    • For cleaning aluminium brake callipers.
    • Soft brass bristles facilitate damage-free cleaning.
    • Slim design - allows working in areas with restricted access.
    • Plastic handle with suspension hole.
     

  • Special Tool for Brakes
    • For installing and removing spring plates and the holding device of brake linings on drum brakes; e.g. on VW; SEAT; SKODA; OPEL and RENAULT with rear drum brakes.
    • Push- and turn-part with carbide coating layer in front working area.
    • Plastic handle.
    • Chrome vanadium.
    • Surface chrome plated.

  • Brake Callipers File
    • Extra slim style (width 10 mm); especially appropriate for Japanese vehicles.
    • For removal of brake dust; rust and dirt from the brake calliper.
    • With integrated flat scraper at the front end for removing crude residues.
     

  • Brake Line Flare Nut Wrench
    • For screwed connections on brake lines at the front
      and rear axle.
    • Straight design for the operation of the brake line screwing at the front axle.
    • Offset design for the safe operation of the brake line screwing at the rear axle.
    • Anti-slipping.
    • Reinforced design.
    • Straight slot / with 10x11 6-point.
    • Chrome vanadium.
    • Surface chrome plated.

  • Brake Line Flare Nut Wrench
    • For screwed connections on brake lines at the front
      and rear axle.
    • Straight design for the operation of the brake line screwing at the front axle.
    • Offset design for the safe operation of the brake line screwing at the rear axle.
    • Anti-slipping.
    • Reinforced design.
    • Straight slot / with 10x12 6-point.
    • Chrome-Vanadium.
    • Surface chrome-plated.